Helium ready KONA Enterprise Gateway (Ethernet, 3G/4G)— base station for LoRaWAN network deployment

Helium ready KONA Enterprise Gateway (Ethernet, 3G/4G) is a base station for LoRaWAN network deployment. Equipped with ECC608 crypto-chip, the radio path is built on SX1308 which corresponds to Helium HIP19 requirements. 

 

To facilitate the rapid deployment of the LoRaWAN network, you only need to provide a -48V DC / POE power supply. This gateway is very compact and lightweight, comes with a built-in 3G/4G Cat-6 modem and Ethernet backhaul connector.

 

LoRaWAN, 3G/4G and GPS antennas are built into the device case. For remote applications and additional flexibility, the gateway also supports optional external LoRaWAN, 3G/4G and GPS antennas. Electrostatic discharge and lightning protection is integrated into all of its interfaces.  The Helium ready KONA Enterprise LoRaWAN gateway meets environmental requirements with IP-67 ingress protection for the most demanding outdoor installations. Mean time between failures is 450,000 hours, or 50 years, which means it is virtually “always on”, and the total cost of ownership is the lowest for the operator.

*Full functioning of the gateway (Network Data Forwarding and Proof of Coverage) will be provided after the adoption of the Milestone 3: Introduction of Light Target Completion: Q2 2022 (April 2022).

Specifications

Mean time between failures (MTBF)

450 000 hours

Energy consumption

< 7 W

Working temperature range

from -40°C to +80°C

Working humidity range

10% to 100 %

Ingress protection

IP-67

Size

145.81×178.78×79.5mm

Weight

1.2 kg

ISM Bands

All Global Bands

Transmitter power

14 dBm to 27 dBm

Receiver sensitivity

-139.5 dBm (SF12, 293 bits/sec)

Receiver noise figure

2.5 dB

Receiver linear figure

-5 dBm

Dynamic Rx range

70 dB Analog, 100+ dB Digital

Support for classes A, C

yes

Adaptive data transmission speed support

yes

Ethernet connection

RJ-45 (10/100 BaseT)

3G/4G channels

Internal with optional External

LoRa antenna type

N-Type

Power supply type

803.3af POE or 48VDC

Instruments

Access Control List managment;

Cellular Parameter Configuration;

Radio Configuration and Control;

Remote Software Upgrades;

Active and Passive Image Management.

Network applications

DHCP v4 Client;

TFTP Server;

HTTP server;

Firewall and Access Lists.

Security

IEC 60950-1 (CE), UL 60950-1 (US/C)

Environment

ETSI EN 300 019-2

Electromagnetic compatibility

ETSI EN 55022 Class B;

ETSI EN 55024;

ETSI EN 300 489-1/-3.

Downloads

Datasheets